If you are having issues with your HDMI Splitter not working with your Samsung TV. There are a few things to try before giving up and calling in a professional.

First, make sure the splitter is compatible and supports 4K video when used with your Samsung TV.

Next, check that the correct input/source is selected on the Samsung TV.

If you have multiple HDMI cables connected to the splitter box, you might also want to try swapping them around.

As this can help identify which specific cable is causing an issue.

Finally, if all else fails it could be an issue with the splitter box itself.

So you may need to replace it or contact customer support for further help troubleshooting.

Introduction to HDMI Splitter

A HDMI splitter allows you to connect multiple HDMI devices with one HDMI cable.

HDMI splitters are commonly used to extend the distance between a source and a display or to combine several displays into one.

You can combine HDMI splitters with HDMI switchers in order to switch between multiple HDMI sources and then split the signal to multiple displays.

A HDMI splitter allows you to partition a single HDMI signal into two identical signals.

And send them to two different displays.

It is a reasonably priced way of converting one HDMI port into two so that several displays may be used simultaneously.

The ARC HDMI splitter has one input port and two output ports.

It supports lots of high-resolution audio and video formats like 4K Ultra HD and HDR for quality viewing experiences.

Splitting one HDMI jack into additional jacks allows you to utilize multiple displays.

How to Connect HDMI Splitter to Samsung TV

Connecting an HDMI splitter to a Samsung TV is relatively easy.

  1. First, you need to locate the HDMI ports on your Samsung TV.
  2. Then, plug one end of the HDMI cable into the port on the splitter and the other end into the Samsung TV.
  3. After that, connect all of your desired devices to the remaining ports on the splitter using additional HDMI cables.
  4. Finally, switch your Samsung TV’s source to display the device connected through the splitter.
  5. Depending on your setup, you may need to adjust settings such as audio output before everything is working properly.

With these simple steps, you can easily connect an HDMI splitter to your Samsung TV and have multiple devices hooked up in no time!

Reasons Why HDMI Splitter Is Not Working on Samsung TV

If you are experiencing issues with your Samsung TV not recognizing HDMI input.

It is likely due to a number of potential causes.

  1. One of the most common reasons for HDMI splitter not working on Samsung TV is because the ports may have been damaged after a lightning strike.
  2. Other potential causes include an outdated HDMI cable, incorrect settings, or even a faulty port or device.
  3. It is also possible that the resolution of the device connected to your Samsung TV via HDMI is not supported by the television itself.

If you are unsure why your Samsung TV’s HDMI ports are not working, it is best to consult a professional technician who can diagnose and repair any underlying issues.

HDMI Splitter Troubleshooting Basics

One of the most common problems with HDMI splitters is that they may not be working properly for two monitors.

This means that if you have a splitter connecting two screens to one device, it may not be allowing the signal to pass through from both ports.

Additionally, HDMI splitters can sometimes keep cutting out.

Meaning the signal will go in and out intermittently when trying to watch something on one or both of the screens.

In order to troubleshoot these issues, start by checking if the cables are firmly connected at both ends.

If this does not work, try switching out any existing cables for newer ones with higher bandwidths.

If this still does not solve the issue, it’s possible that your HDMI splitter box is faulty and needs to be replaced.

HDMI Port Replacement on Samsung TV

If you can’t find the HDMI port on your Samsung TV, don’t panic.

It is possible to replace the HDMI board for Samsung TV with relative ease.

Before attempting to repair or replace the HDMI port.

It is important to make sure that it has not been damaged by power surges or lightning strikes.

If this is not the case, you will need an HDMI board for Samsung TV and some basic tools to complete the replacement.

Once you have sourced these items, you can follow the instructions in your user manual to complete the repair.

The cost of repairing a Samsung TV’s HDMI port will vary depending on parts required and labor costs.

But you should expect to pay between $100-200 for a full repair service.

hdmi splitter not working with samsung tv

Tips for Optimizing HDMI Splitter Performance

For optimizing HDMI Splitter performance, it is important to ensure the quality of the cables used for connecting devices.

Additionally, if possible, avoid long cable runs as they can cause signal loss.

Also, if your splitter supports the latest version of HDMI, upgrade to that version.

If you experience interference or unexpected connection issues.

Try using a shielded cable for better noise reduction and improved resolution.

Lastly, make sure all connected devices are compatible with each other.

And that they support the same HDMI standards before trying to connect them through a splitter.

Following these tips should help improve the performance of your HDMI splitter.

Best HDMI Switcher for Samsung TV

When it comes to finding the best HDMI switcher for your Samsung TV, you have plenty of options.

  1. The best HDMI switcher for PS5 is the Kinivo 301BN Premium 3-Port HDMI Switch with IR Wireless Remote.
  2. It supports 4K120Hz and is perfect for gaming.
  3. This switch also has an Auto-Switching feature that allows it to automatically detect the active device and switch to it.
  4. Making switching between devices easy and efficient.

For those looking for a more budget-friendly option.

  1. The Cable Matters 5×1 HDMI Switch is an excellent choice as well.
  2. It offers 4K resolutions at 60 Hz and supports up to seven different audio formats.
  3. With its three HDMI inputs, this switch can easily handle multiple devices such as game consoles, Blu-ray players, cable boxes, and streaming devices.

No matter what your needs may be.

You’re sure to find the best HDMI switch for your Samsung TV that fits within your budget and provides you with exceptional performance.


If an HDMI splitter is not working with a Samsung TV.

It could be due to a variety of factors.

Such as compatibility issues with the splitter and the TV.

Incorrect setup of the splitter, or a malfunctioning splitter.

Troubleshooting steps that can be taken include checking the connections.

Making sure that the splitter and the TV are compatible, and trying a different HDMI splitter to see if it resolves the issue

In conclusion, if your HDMI splitter is not working with your Samsung TV, it is likely due to a lack of HDCP compliance.

You may need to purchase a new splitter or HDMI cable that is HDCP compliant and check that all of your devices, cables and ports are compatible.

Other potential issues include interference from other devices, weak signal strength, or incompatible HDMI cables.

It is important to remember that all parts of your setup must be HDCP compliant for it to work properly.

With the right splitter and cables, your HDMI splitter should work with your Samsung TV.

If the problem persists, it may be necessary to contact the manufacturer of the HDMI splitter or Samsung support for further assistance.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *